FAQS: YOUR QUESTIONS ANSWERED.

If you still have any questions about any of City Restore's products, application instructions or our on-site service, please feel free to contact us at (951) 275-6894 or at info@cityrestore.com.

  • Equipment Restore Kit FAQs
  • Super Concrete Remover FAQs
  • SPLAT Asphalt Remover FAQs
  • FLASH Special Adhesive & Sticker Remover FAQs

EQUIPMENT RESTORE KIT

What is Shine?

Shine is a resin-based paint rejuvenator with pigment enhancers that bring back original color.
How long does Shine last?

Approx 18 months – 2 yrs. in direct sunlight, but can be reapplied as necessary.
Can you paint over Shine?

Yes, it works great in this capacity. Apply the paint after the final coat of Shine. Wait for the paint to dry and apply another thin layer of Shine to the painted area.
How long does Shine take to dry?

45 SECONDS in direct Sunlight. Your equipment is ready to use.
What can Shine be used on?

Any non-porous painted surface. ie. Plastic, rubber, vinyl, fiberglass, etc….
At what temperature can I apply Restore Products?

ALL of our products can be applied in temperatures as low as 40 degrees and as high as 120 degrees.
Do I have to clean the item first?

Yes, that’s why we have a 3-step cleaning process with final spray to remove all unnecessary oxidation and pollution before applying.
Can you spray Shine over stickers?

Yes, Shine will actually rejuvenate the stickers also.
What happens if I spray Shine on the windows

You can use Flash! Apply to a microfiber towel and clean the windows.
What about overspray?

Shine dries so fast there is virtually no overspray, however you should always take precautions when restoring your equipment.
Can I apply Shine by hand?

Yes, but it is not recommended. You will not get the same results.
How much will a gallon of Shine cover?

Approximately, 3-4 medium sized Backhoes.
Will Shine work on my car?

NO! It rejuvenates single stage paint, not clear coated paint.

Super Concrete Remover

What is Super Concrete Remover?

100% Biodegradable, loosens & dissolves Portland in cement.
How long does it take to remove?

Foam Super Concrete Remover onto the machine & let sit for 45 minutes to remove concrete on most surfaces. Repeat as needed.
What can Super Concrete Remover be used on?

Any surface with concrete or concrete residue.
Do we need to clean the machine first?

No, apply directly to the dirty & DRY machine.
What happens if I get it on the windows?

Super Concrete Remover will not damage the windows.
What is the best way to apply Super Concrete Remover?

You will have the best results using a FOAMER so that Super Concrete Remover can sit on the machine longer to dissolve the cement.

SPLAT Asphalt Remover

What can Asphalt Remover be used on?

Any surface with Asphalt.
How long does it take to remove?

Spray Asphalt remover onto the machine and let sit for 20-30 minutes to remove Asphalt on mostsurfaces. Repeat as needed.
Do I need to clean the machine first?

No, unless the machine is covered with mud.
What happens if I get it on the windows?

Asphalt Remover will not damage the windows.

FLASH Special Adhesive & Sticker Remover

What is FLASH?

A glue and adhesive remover that loosens glue and adhesive for easy removal.
How long does FLASH take to dry?

FLASH will dry in approx.. 10 minutes.
What can FLASH be used on?

Any non-porous painted surface.
How long do I have to wait to use FLASH after it’s been applied?

Spray FLASH on and allow 20-30 seconds before trying to remove.
Does FLASH work on painted surfaces?

Yes, it does not affect most surfaces.
Do I need to clean the machine first?

Only if there is a lot of dirt on the area needing treatment.
What happens if I get FLASH on the windows?

FLASH will not damage the windows. We actually recommend FLASH to be used to remove any SHINE that may be on windows and mirrors.
Can I apply FLASH by hand?

Yes! Wear protective gloves and use a terry or microfiber towel.